SunGuard Solar

 

 

 

 

 

 

 

 

Coated Glass - Solar Control Glass - SunGuard Solar

Today’s architecture is notable for its generous use of glass. Homes and offices, flooded with light, play an important role in our quality of life. However, the high degree of transparency of glass can also lead to unwanted increases in heat and ultraviolet light. Modern solar control glass such as SunGuard? Solar is able to reduce unwanted solar energy while allowing maximum visible light transmission for virtually any application.

PRODUCT DESCRIPTION

The SunGuard Series of Solar Control glass is manufactured using GUARDIAN's Silacoat process. The result is a combination of attractive and useful product features. SunGuard? Solar products offer enhanced durability, both chemically and mechanically, when compared to traditional sputter coatings while offering similar or improved energy performance and coated glass quality. The SunGuard? Solar product offering varies from high light transmission with good solar performance to lower light transmission with unsurpassed solar control. All coatings are available on clear float glass and green body tinted float glass.

CHARACTERISTICS AND ADVANTAGES

• Enhanced durability and flexibility for fabrication coupled with
  the excellent optical and performance properties typically associated
  with softer sputter coated products
• Uniform optical characteristics in transmission and reflection
• Excellent mechanical, chemical and thermal durability
• Aesthetically pleasing with both low to high degrees of light reflection
• A broad spectrum of solar control performance

AVAILABILITY

• Standard thicknesses: 4, 5, 6 and  8 mm.
• Other glass thicknesses and size may be available on request.

SunGuard High Performance

Coated Glass - Solar Control Glass - SunGuard? Solar

PRODUCT DESCRIPTION

SunGuard? HP LE Series of products are silver-based Low-E coated products that offer the benefits of Low-E performance coupled with the flexibility for fabrication and solar control performance of SunGuard?.

• Heat treatable / Bendable
• Uniform neutral colour
• Enhanced thermal insulation (U-value up to 1,4 W/m?K)
• Enhanced selectivity (light-to-solar factor ratio)
• Short lead times
• Long shelf life
• Application in insulated glass units only

AVAILABILITY

• Standard thicknesses: 4, 5, 6 and  8 mm.
• Other glass thicknesses and size may be available on request.

link: http://www.sunguardglass.com